Home Furnace Replacement Cost Calculator

Furnace Replacement Cost Calculator

Estimate what a new furnace really costs installed — equipment, labor, venting and materials, and permits — based on fuel type, size, efficiency tier, and how complex your installation is.

2026 U.S. planning ranges benchmarked against current national cost guides. Actual quotes vary by market and project scope.

2026 furnace replacement cost at a glance

Current national cost guides commonly place a gas furnace replacement around $3,800–$10,000 installed. Electric furnaces often cost less to install, while oil systems tend to cost more. Size, efficiency, venting, ductwork, permits, and local labor can move a real quote well outside a simple national average.

With this calculator’s default assumptions (80% AFUE gas furnace, average labor market, moderate install): 1,000 sq ft: ~$3,850–$7,800  ·  1,500 sq ft: ~$3,950–$8,000  ·  2,000 sq ft: ~$4,050–$8,200  ·  2,500 sq ft: ~$4,200–$8,450. Use the calculator below for your fuel, size, efficiency, and installation conditions.

Ready for real numbers?

On this page: Calculator · What drives the price · Cost tables · Repair or replace? · Ways to save · Related calculators · FAQ

Not sure what size furnace you need? Size it first with the furnace size calculator, then come back to price it.

Replacement cost

Calculate your furnace replacement cost

Fuel type sets the equipment price baseline.

Printed on the old furnace’s rating plate. For proper sizing, use the furnace size calculator.

For electric furnaces, tiers mainly reflect blower and staging features.

New venting, duct changes, or fuel conversions raise labor costs.

Labor and overhead vary by market; use the option that best matches your local quote environment.

Optional add-ons (priced installed)

These are 2026 U.S. planning ranges for professional installation. The only way to know your actual project price is to compare quotes from local contractors — compare multiple itemized quotes when practical.

What actually drives furnace replacement cost

Two homeowners with the same house can get quotes thousands of dollars apart. Almost all of that spread comes from four factors:

  1. Install complexity. A like-for-like swap — same fuel, same location, existing venting reused — is the cheapest job a contractor can quote. Adding new PVC venting for a first-time high-efficiency install, modifying the plenum or ductwork, or converting fuels can add substantial labor and material cost.
  2. Efficiency tier. An 80% AFUE furnace is the budget baseline. Condensing models (90–96% AFUE) cost more upfront and need sealed combustion venting and a condensate drain. Premium modulating furnaces with variable-speed blowers sit at the top of the price range and are designed for finer temperature and airflow control.
  3. Local labor rates. The same installation is priced very differently in a major metro versus a rural market. Labor, overhead, permits, and project scope can materially change the final installed total.
  4. Furnace size. Bigger furnaces cost more, but size is the factor homeowners most often get wrong in the other direction — paying for capacity they don’t need. Confirm the right size with the furnace size calculator before accepting a quote for a larger unit.

Fuel type matters too, but installed and operating costs vary by region, utility rates, and project scope. Compare operating costs with the energy cost calculator.

2026 efficiency note: 80% AFUE gas furnaces are still part of today’s market. The U.S. Department of Energy’s 95% AFUE minimum for certain residential gas furnaces is scheduled to take effect in late 2028.

Furnace replacement cost by home size

Installed price ranges for a gas furnace replacement, assuming an average labor market and a moderate-complexity job (no fuel conversion or relocation) — the same defaults as the calculator above.

Home size Typical furnace 80% AFUE installed 90–96% AFUE installed
1,000 sq ft 40–60k BTU $3,850–$7,800 $4,850–$9,750
1,500 sq ft 60–80k BTU $3,950–$8,000 $5,000–$10,050
2,000 sq ft 80–100k BTU $4,050–$8,200 $5,200–$10,400
2,500 sq ft 100–120k BTU $4,200–$8,450 $5,450–$10,800
3,000 sq ft 120–140k BTU $4,350–$8,750 $5,700–$11,300

Furnace replacement cost by fuel type

Fuel type Typical installed cost Notes
Natural gas $3,800–$10,000 Most common; widest equipment selection
Propane $3,900–$6,000* Tank, fuel-line, or conversion work can add substantially to the base install
Oil $6,750–$10,000 Highest equipment cost; fewer installers
Electric $2,000–$7,000 Cheapest to install; highest operating cost

Ranges are broad 2026 national benchmarks; the calculator uses component-level planning ranges. *Propane tank or fuel-line work is separate. Use the calculator above to adjust for your efficiency tier, install complexity, and labor market.

How these 2026 furnace cost ranges were checked

National cost guides do not agree on one exact number, so this calculator uses component ranges instead of a single average. As a market check, Angi and HomeAdvisor currently report an overall furnace-installation range around $2,823–$6,897, while both place many natural-gas furnace installations around $3,800–$10,000. More complex projects can run higher.

Sources: Angi 2026 furnace cost data · HomeAdvisor furnace replacement cost. Prices are not quotes; local labor, equipment brand, venting, permits, ductwork, and fuel infrastructure can change the total.

Repair or replace your furnace? What to compare

There is no single dollar cutoff that works for every furnace. Compare the repair estimate with the system’s age, repair history, efficiency, comfort problems, warranty status, and the installed price of a replacement. If the furnace is around 15 years old or has needed repeated repairs, getting a replacement quote gives you a useful side-by-side comparison.

A suspected cracked heat exchanger should be evaluated promptly by a qualified HVAC professional because it can create a combustion-safety risk. For less serious failures on a newer system, a repair may still be the better value.

5 ways to pay less for the same furnace

1. Get at least three quotes

Multiple itemized quotes make it easier to compare equipment, warranty coverage, labor, permits, and project scope rather than comparing one bottom-line number in isolation. Request quotes from local pros and compare the included work line by line.

2. Replace in the off-season

Installers are slammed during the first cold snap and price accordingly. Late spring through early fall usually brings better availability, more negotiating room, and occasional off-season promotions.

3. Don’t pay for capacity you don’t need

Oversized furnaces cost more upfront, short-cycle, and wear out faster. Verify the size with the furnace size calculator before agreeing to a bigger unit — especially if you’ve air-sealed or insulated since the old furnace went in.

4. Check current rebates and incentives

For projects placed in service in 2026, the federal Energy Efficient Home Improvement Credit is no longer available. State, local, manufacturer, and utility incentives may still apply, so check current programs before choosing equipment. See the IRS Form 5695 instructions for the federal credit termination date.

5. Protect the investment from day one

A furnace running with a clogged filter works harder and fails sooner. Stock up on replacement air filters (size yours with the air filter calculator), and pair the new furnace with a compatible smart thermostat if its controls support one. If you add a whole-house humidifier, humidifier filters/pads should be replaced on the schedule specified by the humidifier manufacturer.

Frequently asked questions

How much does it cost to replace a furnace?

Current 2026 national cost guides commonly place gas furnace replacement around $3,800–$10,000 installed. Electric furnaces often cost less to install, while oil systems tend to cost more. Your actual price depends on furnace size, efficiency, venting, ductwork, permits, installation complexity, and local labor rates — use the calculator above for a planning range matched to your project.

Why do furnace installation quotes vary so much?

Quotes for the same job can differ substantially because contractors may specify different equipment, labor, warranty coverage, venting, ductwork, permits, and scope. A like-for-like swap is usually less expensive than a job that needs new venting, duct modifications, relocation, or a fuel conversion. Comparing multiple itemized quotes helps you see those differences clearly.

Is a high-efficiency furnace worth the extra cost?

A high-efficiency condensing furnace usually costs more upfront because of the equipment, venting, condensate handling, and controls. Whether that premium pays back depends on climate, fuel prices, usage, and the efficiency of the furnace being replaced. For 2026 installations, the federal Energy Efficient Home Improvement Credit is no longer available, though state, local, and utility incentives may still exist.

How much of the replacement cost is labor versus equipment?

The split between equipment and installation varies widely by project. Labor, venting, duct modifications, old-unit removal, permits, and local market conditions can all materially change the installed total, which is why comparing the complete scope is more useful than comparing furnace prices alone.

Does the price include removing the old furnace?

Usually, yes — most professional quotes include disconnecting, removing, and disposing of the old unit, and this calculator’s materials line accounts for it. Always confirm it in writing, along with the permit fee, so nothing shows up as a surprise line item later.

Should I repair my furnace or replace it?

Compare the repair cost with the furnace’s age, repair history, efficiency, comfort problems, and the cost of replacement rather than relying on a single cutoff. Furnaces around 15 years or older with repeated repairs deserve a replacement quote for comparison. A suspected cracked heat exchanger should be evaluated promptly by a qualified HVAC professional because it can create a combustion-safety risk.

Last reviewed: 2026-10-03